A 2000 square foot home needs an air conditioner with an output of 7,500 BTU or more. The size of the air conditioner depends on the cooling load of your home. Cooling load is the amount of energy required to heat up a particular area. A bigger air conditioner will work best on homes with high cooling loads. Cooling load is calculated by multiplying the square footage of your home by its average wall area density, the amount of wall area per square foot.
If you are building a new home, you will need a larger unit with more capacity than a home that has been standing for a while.
If you are planning to build a new home or remodel an existing one, you will need larger air conditioners than an older home with a smaller floor plan. The size of air conditioners used in older homes is dependent on the size of the home and the cooling load. Cooling loads are the amount of heat needed to cool a specific area.
A larger air conditioner will work better on a larger space, reducing the amount of time the system runs while still maintaining the comfort level of your family and those in the room.
If you’re wondering the right size for your home, you can use a calculator to determine just that. Just plug in your square footage, number of rooms, and outdoor temperature to find the right size. Your comfort zone should be between 20-30 degrees. For example, if you have two bedrooms and an office, you’ll need an air conditioner with a capacity of 5.5 to 7.5 tons.
The size of your air conditioner will have a lot to do with your comfort needs.
You’ll need an air conditioner that’s equal to or larger than the square footage of your living space and the amount of insulation in your home. So if you have 2,000 square feet of living space, you’ll need a home cooling system with at least 2,000 square feet of cooling capacity.
In general, you should look for an air conditioner that can cool a home with a square footage of around 2,0square feet.
If you have a 2000 square foot home, an air conditioner with an HSPF rating of 13 or higher will cool your home properly. If your air conditioner has an HSPF rating lower than 13, your home will be either overcooled or under cooled. Under cooled homes are uncomfortable because they are too cold and over cooled homes are uncomfortable because they are too hot.
The size of your air conditioner is dependent on your comfort needs.
It’s always best to size your air conditioner based on your home’s square footage. Let’s say you have a 2000 square foot home. An air conditioner with a 12,000 BTU rating will cool an average house with this square footage down to 74 degrees. If you live in an area where summers are extremely hot and humid, you’ll need a larger system to keep you comfortable.
If your home is smaller or you have a lot of windows, you will need a larger unit to properly cool the space.
If you have about 2000 square feet of space, an HVAC system that size will work best. There are several factors to consider when determining the size of your system. One of the main ones is the usage of the space. You will want to size your system appropriately so that it will meet the demands of the space and the season.
However, if your air conditioner is too large, it will be operating inefficiently.
If you’re looking at a 10.0 cubic meter system for your 2000 square feet of living space, you’ll need to purchase an HSEER-rated system. This means that the system will meet or exceed the minimum required energy efficiency for your area.
Conclusion
If you have two windows, an average window size for both is 8-9.5”. If you have four windows, an average window size for all four is 8-9.5”. For a window with a high-performance insulation value (HI-R), install at least two windows. For windows without high-performance insulation value (HO-R), just install two windows with the average size.
Related Links
How much does an air conditioner cost for a 2000 sq ft home?How much is a new AC unit?